Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks,Japan, a possible high-pressure dehydration product of antigorite serpentinite     

Tadao Nishiyama  Hibiki Eguchi  Dai Shiosaki  Akira Yoshiasa  Nobutatsu Mochizuki  Yasushi Mori  Kazumasa Sugiyama  Hiroshi Arima  Kunio Yubuta 《Island Arc》2021,30(1):e12382

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks (HMR), west-central Kyushu, Japan, may be formed by high-pressure dehydration of antigorite, and may indicate deep subduction of serpentinite reaching a pressure–temperature condition of 1.6 GPa and 740–750 °C. Three rock types have been identified based on mineral assemblage and rock texture: Type I (L) consisting of medium-grained (1–5 cm long) olivine + enstatite + chromite ±tremolite with secondary talc and anthophyllite that occurs in low-grade metamorphic rocks of the biotite zone, Type I (H) of coarse-grained (up to 10 cm long) olivine + enstatite (with clinoenstatite lamella) + chromite ±tremolite with secondary talc that occurs in high-grade metamorphic rocks of the garnet-cordierite zone, and Type II composed of Al-spinel + chlorite + olivine + apatite + ilmenite with minor sodic gedrite in the garnet-cordierite zone together with Type I (H). Olivines in all rock types are mostly serpentinized during exhumation. The chromite-olivine thermometer gives 560–690 °C for Type I (L) rocks, and the spinel-olivine thermometer gives 610–740 °C for Type II rocks. The peak metamorphic pressure will be higher than 1.6 GPa based on the location of the experimentally determined invariant point (P = 1.6 GPa and T = 670 °C) of antigorite + forsterite + enstatite + talc + H₂O. This estimate is consistent with the occurrence of chlorite in Type II rocks, which is stable up to 890 °C at 2.0 GPa. The spinifex-like textured metaperidotites occur as small bodies in the low P/T type gneisses, implying tectonic juxtaposition of them probably during exhumation of the HMR. Recent findings of medium pressure (0.9–1.2 GPa) granulites and gneisses from the HMR may indicate that the HMR has a deep root into the wedge mantle from which the spinifex-like textured metaperidotites have derived.  相似文献   

Investigation of local time dependence of Mercury's sodium exosphere based on a numerical simulation     

Hiroaki Misawa  Aya Sonobe  Akira Morioka 《Planetary and Space Science》2008,56(13):1681-1687

Mercury has a surface-bounded exosphere (SBE) similar to that of the Moon. One of the atmospheric species, sodium, was found by ground-based observations to be the most prominent component. Mercury's sodium SBE is known to be non-uniform with respect to local time (LT) in low-latitude regions: the sodium column density in the dawn-side region is larger than that in the dusk-side region, and the sodium abundance is the largest in the morning-noon region. To reveal the production processes for the exosphere near Mercury's surface, the LT dependence of the exosphere was investigated through a numerical simulation. Three data sets of sodium column densities observed for the dawn-side hemisphere, observed by Sprague et al. [1997. Distribution and abundance of sodium in Mercury's atmosphere, 1985-1988. Icarus 12, 506-527], were compared with results simulated by a 3D Monte Carlo method, and the source rates and density of sodium of the planetary surface were estimated. In the simulation, the photon-stimulated desorption (PSD) and thermal desorption (TD) processes were assumed as the release mechanisms. The sodium source rates for the three data sets, at respective heliocentric distances of about 0.33, 0.42, and 0.44 AU, were estimated as 1-4×10⁸ Na/cm²/s with weak LT dependence. In contrast, the expected sodium surface density showed clear dependence on LT and the heliocentric distance. The sodium surface density decreases from early morning to noon by a few orders, and, particularly for large heliocentric distances, the surface is in a condition of sodium excess and depletion with respect to the surface sodium density assumed by Killen et al. [2004. Source rates and ion recycling rates for Na and K in Mercury's atmosphere. Icarus 171, 1-19] in the early morning and morning-noon regions, respectively. This study implies that the decrease in sodium surface density from the early morning to noon regions might produce the characteristic LT dependence in the low-latitude dawn-side region.  相似文献   

The effects of possible contamination by sample holders on samples to be returned by Hayabusa2     

Naoki Shirai  Yuzuru Karouji  Kazuya Kumagai  Masayuki Uesugi  Kaori Hirahara  Motoo Ito  Naotaka Tomioka  Kentaro Uesugi  Akira Yamaguchi  Naoya Imae  Takuji Ohigashi  Toru Yada  Masanao Abe 《Meteoritics & planetary science》2020,55(7):1665-1680

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.  相似文献   

Best practices for the use of meteorite names in publications     

Philipp R. Heck  Christopher Herd  Jeffrey N. Grossman  Dmitry Badjukov  Audrey Bouvier  Emma Bullock  Hasnaa Chennaoui‐Aoudjehane  Vinciane Debaille  Tasha L. Dunn  Denton S. Ebel  Ludovic Ferrire  Laurence Garvie  Jrme Gattacceca  Matthieu Gounelle  Richard Herd  Trevor Ireland  Emmanuel Jacquet  Robert J. Macke  Tim McCoy  Francis M. McCubbin  Takashi Mikouchi  Knut Metzler  Mathieu Roskosz  Caroline Smith  Meenakshi Wadhwa  Linda Welzenbach‐Fries  Toru Yada  Akira Yamaguchi  Ryan A. Zeigler  Michael Zolensky 《Meteoritics & planetary science》2019,54(7):1397-1400

  相似文献   

Cathodoluminescence of high-pressure feldspar minerals as a shock barometer          下载免费PDF全文

Masahiro Kayama  Toshimori Sekine  Naotaka Tomioka  Hirotsugu Nishido  Yukako Kato  Kiyotaka Ninagawa  Takamichi Kobayashi  Akira Yamaguchi 《Meteoritics & planetary science》2018,53(7):1476-1488

Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.  相似文献   

Linking Individual and Collective Agency for Enhancing Community Resilience in Northern Ghana     

Kei Otsuki  Godfred Jasaw  Victor Lolig 《社会与自然资源》2018,31(2):151-165

This article aims to explore the relationship between individual adaptive actions and enhancement of community resilience to climate change as a communal objective. It proposes to pay attention to the concept of reflexivity as the primary individual capacity to link adaptive actions and community resilience. Drawing on the field research conducted in northern Ghana in 2015, this article specifically examines life histories of four small farmers and shows that they individually take adaptive actions and reflect on these actions. However, little opportunity exists for them to systematically communicate the reflections with others to learn from their experiences, nurture collective agency and enhance community resilience. The article concludes by outlining new strategies needed to facilitate the communication in particular cultural and policy contexts.  相似文献   

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification          下载免费PDF全文

Ping Xiang  Akira Nishitani 《地震工程与结构动力学》2015,44(13):2199-2220

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

地质聚合物技术的发展近况     

KoIKEDA DangFENG AkiraMIKUNI 《地学前缘》2005,12(1):206-213

概要介绍了一种无机聚合物———地质聚合物。首先对地质聚合物材料的制备过程作了介绍。根据原料的不同,地质聚合物材料的制备可以有两种途径:一种是以偏高岭石为基础原料,一种是以粉煤灰为主要原料。通常以硅酸钠水溶液作为单体硅源,氢氧化钠溶液作为碱激发剂以提高原料的溶出性。对某些在常温和低于100 ℃下制备的独石材料作了介绍。对煅烧高岭石,叶蜡石,粉煤灰和钢渣的溶出特性作了阐述。应用SEM EDX,对以粉煤灰为原料的地质聚合物材料的化学组成作了分析。最后对地质聚合物材料的经济性以及在环境保护等领域的应用前景,特别是在减少二氧化碳排放与废弃物处理方面的意义作了介绍。  相似文献   

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones     

Yasuhiro Yokota  Tsuneo Matsunaga  Junichi Haruyama  Satoru Yamamoto  Tomokatsu Morota  Kazuto Saiki  Kohei Kitazato  Akira Iwasaki  Naru Hirata  Rie Honda  Hitoshi Mizutani 《Icarus》2011,215(2):639-660

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.  相似文献   

Volume transports proceeding to the Kuroshio Extension region and recirculating in the Shikoku Basin   总被引：4，自引：1，他引：3  

Akira Nagano  Kaoru Ichikawa  Hiroshi Ichikawa  Masanori Konda  Kiyoshi Murakami 《Journal of Oceanography》2013,69(3):285-293

The volume transport of the Kuroshio, the western boundary current of the North Pacific subtropical gyre, varies vigorously due to merging of disturbances propagating from the entire North Pacific. Taking into account the recirculation in the Shikoku Basin by the zonal observation line at 30°N to the west of the Izu–Ogasawara Ridge, we estimated the volume transport in the top 1,000 m layer toward the Kuroshio Extension region. The volume transport of the local recirculation gyre in the Shikoku Basin increases associated with the westward extension of the gyre, particularly in the period of the large meandering path of the Kuroshio south of Japan. Meanwhile, most of the transport variations toward the Kuroshio Extension region correspond to those of the Kuroshio transport on the continental slope south of Japan, which vary independently of those of the recirculation gyre.  相似文献